Where less extreme accuracy is required, the innovative design of the Practik provides an economical alternative with a guaranteed straightness of 1.00mm (0.039”) making it an ideal general purpose cutter.

	1.0 KP01	1.5 KP02	2.0 KP03	2.5 KP04	3.0 KP05
A cm (")	100 (40)	150 (60)	200 (80)	250 (100)	300 (120)
B cm (")	117 (46)	167 (65.75)	217 (85.5)	267 (105.25)	317 (124.75)

Where the requirement is to cut materials wider than 3m (120”) the inbuilt rigidity of the Max allows the cutter bar to span the output of all “super-wide” format printers

	3.5 KM01	4.0 KM02	4.5 KM03	5.0 KM04
A cm (")	350 (140)	400 (160)	450 (180)	500 (200)
B cm (")	372 (146.5)	422 (166.25)	472 (186)	522 (205.5)

Superbly styled, the Sabre is essentially a Practik cutter bar with it’s own integral base. The extruded and silver anodised aluminium base incorporates a narrow groove to accept the blade tip when cutting, a full length silicon rubber grip strip mounted in the surface of the base and two more on the underside of the cutter bar ensures all work is held perfectly in place while cutting and provides protection for even the most sensitive surfaces.

The innovative hinge and lift arm mechanism not only makes it possible to cut materials which are longer than the length of the cutter, it allows the Sabre to accept materials up to 13mm (0.5”) without affecting either the line or angle of cut, the latter always remaining perfectly vertical.

Efficiently engineered for volume production, the Sabre offers the same cutting capacities as the Practik and embodies the highest standards of design excellence combined with outstanding value for money.

	1.0 KS01	1.5 KS02	2.0 KS03	2.5 KS04	3.0 KS05
A cm (")	100 (40)	150 (60)	200 (80)	250 (100)	300 (120)
B cm (")	118 (46.5)	168 (66)	218 (85.75)	268 (105.5)	318 (125)

The combination of the BIG bench with the choice of Keencut’s Javelin, Practik or Max cutter bars creates the ultimate precision cutting table.

The stability of the BIG bench, with individual level adjustment on each leg, provides a firm and flat work surface to ensure extreme accuracy and the integral Lift and Hold mechanism enables the largest work to be aligned and trimmed singlehanded. The Cutter Bars can be lifted and stored safely on wall brackets if the table is needed for other tasks and re-installation is simple using the precise built in location devices, no tools are required.

The aluminium table edge extrusion incorporates a cutting base with a narrow groove to accept the blade tip while cutting, an accurate metric/imperial measuring scale is fitted as standard and a full length silicon rubber grip strip mounted in the surface of the table edge ensures all work is held perfectly in place while cutting and protects the most sensitive surfaces.

The edge of the table extrusion accepts optional clip on support arms to increase the effective working area just when it is needed.

Supplied flat-packed, self assembly is simple and as part of Keencut’s Proteus range of workplace equipment the BIG bench can be extended and added to at any time.