PROTEUS is a strong, elegant, modular system designed to enable any business, large or small, to specify and assemble the exact work, display or storage units needed to create a perfect working environment.

By making a choice from a select range of standard benches or from a wide range of optional linear and modular components PROTEUS will provide a solid stand-alone unit or equip an entire workplace with racking, work-stations, shelves, benches or display units and more.

As business grows and develops any PROTEUS structure can be re-configured and expanded, quickly and economically to work in complete harmony with the new demands.

Designed with strength, simplicity and enduring good looks as guiding principles PROTEUS will enrich any facility and please the most discerning owner.

No extra tools are necessary, assembly is ultra-simple and the applications are endless.

Combination Bench and Matboard/Frame Storage Units. (Worktops not provided) Made in two sizes with two extensions PROTEUS offers a huge saving in linear storage cost over any available alternative.

The smooth internal base of heavy duty interlocking extruded plastic channels allows unwrapped mat-board or even finished frames to be moved in or out with no edge damage.

The wider storage slots are fitted with central base dividers which keep the mat-boards near vertical to avoid bowing but allow space for easy sorting and selection of colours.

Tables and Benches. (Worktops not provided)
Available in many standard sizes (see price list) and three standard heights for sitting or standing each bench or table is supplied with eight cross beams for stability. The lower beams can be placed at any specific height to provide stability and ample room for the legs of a seated person. Low coffee tables can be specified from cut lengths and need only one beam on each side to give adequate stability.

Glass Top Tables and Benches. (Glass tops not provided)
Any bench or table unit can be fitted with a glass top with the addition of the optional white silicon rubber cord and four extra end caps to cover the upper end of the legs. The top beams are assembled (see instructions) with the cord groove upwards. After completion of the unit assembly the rubber cord when pressed into the groove is held firmly and gives a very stable grip and support all round the edge of the glass top.